TURBINE PUMPS

It's design mixes the centrifuge principle and the principle of positive displacement. The propelling turbine, is a solid disc for axial compressor. This turbine is located inside a chamber with a circular channel on both sides. The fluid that enters through the aspiration nozzle is carried to the exit nozzle and along the way due to the centrifuge force the fluid is driven to the outer channel similar to repeated levels of compression in a centrifuge pump.

APLICATIONS: • For any use where average flows and relatively high pressures are required. • Controlling Draft. • Condensed return. • Pumping of: Gasoline, queroseno, hydrocarbons in general, butane, propane (in liquid form), chemical products. • High Risk Systems. • Fumigation. • Dry - Cleaners. • Laundry. • Food Factories. • Car - Washes. • To wash filtrate meshes.		ADVANTAGES: • Smaller size and lower cost, compared to other devices. • Flows with variable manometric heights. • Pumping of hot liquids. • It can operate with fluid containing up to a 20% of gasses or fumes • Reversible operation. • It does not vaporize liquids close to its temperature of boiling. • Simplicity of design and maintenance. • It does not generate axial loads on the bearings. • Unloading of the liquid vein without pulsations. • It supports blows and battering ram.
MATERIALS: Body: Smelting semi steel Faces: Smelting semi steel Axis: Stainless steel AISI 410 Turbine: Phosphorous bronze Bearings: Armoured bobbins		MA They can be made completely in: Bronze, Smelting semi steel, Anticorrosive alloys. According to buyers specifications it can be equiped with: Mechanical seal, Epoxi painting, anticorrosive treatment.
MODELS: We are currently manufacturing the following models according to requirements needed:
Boilers Pumps: Model Flow and Nominal pressure Motor Type PBSA PBA PBB PBC PBD PBK PB-1 PB-2 PB-3 PB-4 PA-1 PA-2 PA-3 PA-4 PH-1 PH-2 PH-3 PH-4 PH-5 PH-B PH-C PH-D 800 lts. @ 7 Kg/cm2² 900 lts. @ 8 Kg/cm2² 2.000 lts. @ 10 Kg/cm2² 3.000 lts. @ 10 Kg/cm2² 4.000 lts. @ 10 Kg/cm2² 5.000 lts. @ 10 Kg/cm2² 3.300 lts. @ 10 Kg/cm2² 5.000 lts. @ 10 Kg/cm2² 6.000 lts. @ 10 Kg/cm2² 11.000 lts. @ 10 Kg/cm2² 1.600 lts. @ 10 Kg/cm2² 3.200 lts. @ 10 Kg/cm2² 4.200 lts. @ 10 Kg/cm2² 7.800 lts. @ 10 Kg/cm2² Contact us Contact us Contact us Contact us Contact us Contact us Contact us Contact us 380/50 HP : 1 @ 2845 380/50 HP : 1 @ 2845 380/50 HP : 2 @ 2845 380/50 HP : 3 @ 2845 380/50 HP : 4 @ 2845 380/50 HP : 5,5 @ 2845 380/50 HP : 5,5 @ 2845 380/50 HP : 7,5 @ 2845 380/50 HP : 10 @ 2845 380/50 HP : 15 @ 2845 380/50 HP : 3 @ 1440 380/50 HP : 4 @ 2845 380/50 HP : 5,5 @ 1440 380/50 HP : 10 @ 1440 Contact us Contact us Contact us Contact us Contact us Contact us Contact us Contact us
Laundry Pumps: Model Flow and Nominal pressure Motor Type PBB-L PBC-L PBD-L PBK-L PB-2-L 2.000 lts. @ 10 Kg/cm2² 3.000 lts. @ 10 Kg/cm2² 4.000 lts. @ 10 Kg/cm2² 5.000 lts. @ 10 Kg/cm2² 5.000 lts. @ 10 Kg/cm2² 380/50 HP : 2 @ 2845 380/50 HP : 3 @ 2845 380/50 HP : 4 @ 2845 380/50 HP : 5.5 @ 2845 380/50 HP : 7.5 @ 2845
Fumigation Pumps: Model Flow and Nominal pressure Motor Type PA-2-FX PA-3-FX PB-2-FX PB-3-FX 3.200 lts. @ 10 Kg/cm2² 4.200 lts. @ 10 Kg/cm2² 5.000 lts. @ 10 Kg/cm2² 6.000 lts. @ 10 Kg/cm2² 380/50 HP : 4 @ 2845 380/50 HP : 5,5 @ 1440 380/50 HP : 7,5 @ 2845 380/50 HP : 10 @ 2845